As more people began using cellular phones there has been an emerging trend of drop in the quality of cellular signals. This results in dropped calls, bad call quality and lower mobile internet speed especially at peak times, during travelling or in crowded places. One of the best ways to overcome this issue is to use a cellular signal booster because cell phones are an important part of our lifestyle and good signal quality is essential like water and food. There are many questions among customers who want to use it, so here we will look into some of them.
How Can You Tell If You Benefit From Using A Cellular Signal Booster?
Usually signal boosters or amplifiers are used when you have good reception outside your home or office but bad reception inside. In many cases, this is due to the building materials used in construction like glass, mesh wires, concrete that reduces or blocks the passage of cellular signals. It can also be due to external factors like trees and other such vegetation as they absorb these signals thereby weakening them dropping their quality further inside. They are also useful in areas where the coverage is limited like rural or isolated areas where it is served by a distant cellular tower.
Can You Install It Yourself?
The cellular signal booster can be installed by an individual and the relatively harder part would be finding the ideal location for installing the external antenna. For this, you have to find where you get the best cellular signal reception outside and that requires a lot more effort. Next, you have to run the cable from the outdoor antenna to the indoor unit i.e. the amplifier, the distance between them should be kept minimum to reduce loss in signal strength.
How To Install The Outside Antenna?
In most cases omnidirectional antennas are used as they pick signals from all directions and don’t need directional tuning. But, in areas where the coverage is minimal or when you require signal from a specific tower, then directional antennas are preferred. You install it facing the nearest cellular tower and you can get the locations of towers on searching online. Also, you can use a signal meter to fine-tune the reception of the outside antenna so that you get the best output signal from the amplifier. Last but not least, the best location to install it is high up on the roof that gives a clear line of sight with the cellular tower and the antenna.
On a final note, these devices are also known by other names like network booster but serve the same purpose of boosting cellular signal.